Ouverz Notre APP!

Profitez du Meilleur Prix.

Ouvrez APP
Original VandyVape Mesh RDA
Original VandyVape Mesh RDA
1/1

Original VandyVape Mesh RDA - Noir

Voir La Traduction
28.22€
31.39
150 Avis

Coupon:

Promotion:

Prise en charge du paiement à la livraison

Entrepôt et Frais

Sélectionnez
CN-099:Expédier entre: Apr 25 - Apr 27

Options du Produit

Sélectionnez
Noir
Visiter le Magasin

Avis (150)

Hugo Alexandre
Apr 13,2018
WHAT’S IN THE BOX:1 x Vandy Vape Mesh RDA Tank1 x 18.5mm Delrin Doc Tip1 x Accessory Bag3 x Kanthal Mesh Wire3 x Ni80 Mesh Wire3 x SS316 Mesh WireTHE DECK:The deck on the Mesh RDA is probably something most of you have never really seen before. Basically what it is, is a postless deck with two really wide clamps. The clamps are controlled by the screws that are accessed via the side of the base and they do a really nice job of holding the Mesh heating element in place. Basically how this deck works is you can use it with a Mesh heating element, a single coil, or a dual coil. I have tried all three types of heating elements in this RDA and I have to say that each and every one of them was extremely simple and easy to work with.The juice well on the deck itself is really not that deep but to be honest, if you are going to run Mesh on this RDA, there really is no reason for a deep juice well since you’re going to be using a ton of cotton that will hold a lot of juice. Besides, even if you do go over the edges of the deck when you drip, the airflow slots on the barrel are mounted so high that you would have to really, really over drip in order to get this atomizer to leak no matter what build you have in there. The barrel actually does a good job of keeping the e-juice in the atomizer should you wind up going over the edge of the base by over dripping.
Voir Plus

Description

Description:
Le VandyVape Mesh RDA est compatible avec le fil de maille et la bobine standard. Il est livré avec un pont invisible sans support de pince, qui supporte la construction de bobines simples ou doubles. En outre, l'atomiseur présente son alimentation au bas avec une broche, ce qui convient à la recharge. Son flux d'air latéral avec 2 fentes d'air assure un bon goût et des nuages massifs. Vous pouvez faire un choix entre la pointe de goutte à goutte et la pointe de doc.

Caractéristiques Principales:
● Design de postes doubles, parfait pour vaporisation de Bricolage

● Flux d'air latéral et inférieur pour un nuage massif
● Matériau: acier inoxydable
● Fil: 510
● Diamètre: 24mm

Spécification

Détails du Produit

Type: Atomiseur Reconstructible,Goutteurs Reconstructible
Atomiseur Reconstructible: RBA,RDA
Matières: Acier Inoxydable
Fil: 510

Poids et Dimension

Poids du produit: 0,1780 kg
Taille de produit(L x W x H): 3,24 x 2,40 x 2,40 cm / 1,28 x 0,94 x 0,94 pouces
Taille d'emballage (L x W x H): 8,00 x 6,00 x 3,00 cm / 3,15 x 2,36 x 1,18 pouces

Liste d'emballage

Liste d'emballage: 1 x VandyVape Mesh RDA Réservoir, 1 x 18,5mm Delrin Doc Tip, 1 x Sac d'Accessoire, 3 x Fil de Mèche en Kanthal, 3 x Fil de Mèche en Ni80, 3 x Fil de Mèche en SS316

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir

Original VandyVape Mesh RDA- Noir


Produits Recommandés

Produits Sponsorisés

Bonus du Nouveau Membre: Coupon de $50
28.22€

Original VandyVape Mesh RDA

Couleur

Quantité - +
Versements: choisir
loading...
loading...
Annuler
loading...
loading...
loading...

Avis

4.71 *****
  • 112
  • 35
  • 2
  • 0
  • 1
  • Tout ( 150 )
  • ( 67 )
  • ( 17 )
Hugo Alexandre
Apr 13,2018
WHAT’S IN THE BOX:1 x Vandy Vape Mesh RDA Tank1 x 18.5mm Delrin Doc Tip1 x Accessory Bag3 x Kanthal Mesh Wire3 x Ni80 Mesh Wire3 x SS316 Mesh WireTHE DECK:The deck on the Mesh RDA is probably something most of you have never really seen before. Basically what it is, is a postless deck with two really wide clamps. The clamps are controlled by the screws that are accessed via the side of the base and they do a really nice job of holding the Mesh heating element in place. Basically how this deck works is you can use it with a Mesh heating element, a single coil, or a dual coil. I have tried all three types of heating elements in this RDA and I have to say that each and every one of them was extremely simple and easy to work with.The juice well on the deck itself is really not that deep but to be honest, if you are going to run Mesh on this RDA, there really is no reason for a deep juice well since you’re going to be using a ton of cotton that will hold a lot of juice. Besides, even if you do go over the edges of the deck when you drip, the airflow slots on the barrel are mounted so high that you would have to really, really over drip in order to get this atomizer to leak no matter what build you have in there. The barrel actually does a good job of keeping the e-juice in the atomizer should you wind up going over the edge of the base by over dripping.
Suggestion:
Small juice well...
Tim
Mar 15,2018
Vorweg : nutze ihn nicht als squonker -Das postless Deck ist simpel und hochwertig... Ich liebe es! -Die topcap sitzt fest -der Geschmack bei fruchtigen Liquids kommt 100% so rüber wie vom Finger abgeleckt-Die luftzug ist sehr frei und er lässt sich auch mit 90 % geschlossener airflow sehr smooth dampfen- durch die Masse an Watte sind 5 bis 10 Züge locker möglich-sifft und spuckt nicht-viele sehen dies als negativ Punkt an das die liquid wanne sehr klein ist.... Ich sage das die Watte eh ne Menge auffängt und mir es viel lieber ist das ich nicht liquid frei in dem Verdampfer rumfließen habe, sodass er mir nicht in der Tasche auslaufen kann... Wer auf ne riesen liquid wanne wert legt wäre mit einem rta besser bedientAlles in allem top er jeden rda in meiner Sammlung (wohlgemerkt bei fruchtigen liquids)
Suggestion:
-süße liquids kommen nicht so gut rüber wie die fruchtigen oder Menthol haltigen-Die airflow lässt sich schwer drehen. (nicht schlimm)
Oleg
Nov 22,2017
Pros: Smoking is less harmful! The grid - wire is a new technology in vaping compared to wire, it has a larger area than the wire and with the same volume of evolved vapor, the temperature on the mesh surface is much lower than that of the wire, and at a lower temperature less carcinogens are released. парение становится менее вредным! сетка - новая технология в вейпинге по сравнению с проволокой, имеет больше площадь чем у проволоки и при том же объеме выделяемого пара, температура на поверхности сетки значительно ниже чем у проволоки, а при меньшей температуре выделяется меньше канцерогенов.
Suggestion:
I did not find any defects in goods.
Tim Schwarze
Jan 11,2018
Atomizer:-great build quality-gold looks rather fancy, not cheap at all-easy to install mesh, which is actually included in great quantities and variations-astounding flavour-dripping is easy due to the wide bore drip tip, of which two are included-cotton can be changed in the blink of an eye, but has to be done right to avoid burnt cotton-pleasing, cold vapor-spits out clouds if you want it toShipping:-took three days to assemble the order and 10 days of shipping, quicker than expected-package was neatly secured and sustained no damage at all
Suggestion:
-wicking is quite hard to get right the first few attempts-sucks juice quickly out of the cotton, so you have to re-drip quite often-needs a lot of wattage to work properly, so battery life could be a concern
philip
Jan 17,2018
das Paket ging leider verloren aber ich konnte den Mesh RDA eines bekannten ausgiebig testen. lässt sich super einfach wickeln es ist auch viel Platz vorhanden. empfehlen kann man das NI80 Mesh in Verbindung mit der Cotton Bacon V2 Watte.man sollte unbedingt einen squonk Mod benutzen und die Watte immer feucht halten. ein dryhit mit Mesh ist sehr unangenehm.belohnt wird aber die Aufmerksamkeit mit einem Kühlen kräftig schmeckendem Dampf und das bereits ab 60 W (getestet auf einer RX Gen3) aber auch hohe Leistungen von 200w und mehr sind ohne kokeln dampfbar solange die Watte feucht ist
Suggestion:
einziges negative ist die fehlende liquid wanne
JD VAPES
Jun 06,2018
Die Watte mit BASE füllen und das zu testende Aroma drauf tröpfeln und probieren bis es wieder nach BASE pur schmeckt.Das nervige Wattewechseln bleibt einem echt erspart.
Suggestion:
Wird bei 100W richtig richtig heiß
Ronny
Nov 17,2017
German: -sehr intensiver Geschmack (der Leistung erfordert-Sweetspot bei 80 Watt) -große Wolken -neues, einfaches Deck (schneller kann man ein Tröpfler nicht wickeln) -universell einsetzbar - Mesh und Coil (single & dual) English: -very intense taste (performance requires-sweetspot at 80 watts) big clouds -new, simple deck (faster you can not wrap a dripper) -universally applicable - mesh and coil (single & dual)
Suggestion:
keine/nothing!
Andree
Mar 30,2018
A small and good Rda. Since he has a BF pin, he is now on the GBOX and works great. Due to the design no siffen and the squonken works great. It is also good in taste, but it needs a high performance to be able to deliver the taste. (100W) Building with the included mesh strips is not rocket science either.
Suggestion:
So far I have not found any, except that Munstück could be a little bit longer. But that is a matter of taste
VandyVape Mesh RDA
Jan 22,2018
Хорошая дрипка за свою цену Достаточно богатая комплектация, удобное использование Легко снимается купол, плотные оринги (абсолютно везде), ничего не люфтит, не выпадает
Suggestion:
Быстро нагревается
Thomas Bjørkenes
Oct 07,2017
Love the ease of building on this, and so easy to wick.It holds a ton of juice.The airflow is super smooth, all in all the best and eadiest dripper with the best flavour i have ever owned.Comes with a plethora of options for mesh, ss, ni 80 , and kanthal.
Suggestion:
The mesh that comes with it is slightly too wide for the deck, so you have to cut it to fit, normal scissors do the job.
Voir Plus
Voir Plus
Voir Plus