Ouverz Notre APP!

Profitez du Meilleur Prix.

Ouvrez APP
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
BFlight 210 210mm FPV Drone de Course sans Brosse
1/1

BFlight 210 210mm FPV Drone de Course sans Brosse - NOIR ET BLEU BNF FRSKY

164.94€
186.37
69 Avis

Coupon:

Promotion:

Prise en charge du paiement à la livraison

Entrepôt et Frais

Sélectionnez
CN-099:Expédier entre: Feb 21 - Feb 23

Options du Produit

Sélectionnez
NOIR ET BLEU BNF FRSKY
Visiter le Magasin

Avis (69)

passerbyeus@yahoo.com
24/04/2018 01:52:48
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Voir Plus

Description

Description:
BFight 210 210mm FPV drone de course présente la structure soignée, la facilité d'entretien et le réglage à distance de la fréquence / bande. Le contrôleur de vol et l'émetteur vidéo sont séparés, ce qui est bon pour la dissipation thermique et la haute performance. Le multirotor a quatre bras indépendants, le rendant commode pour remplacer chacun d'eux. Plus important encore, si le récepteur prend en charge le SBUS, vous avez la possibilité de changer la fréquence / bande directement avec l'émetteur radio dans votre main. Avec BFight 210, FPV racing est sûr d'être plus agréable.

Caractéristiques Principales:
● Structure soignée et bonne dissipation thermique avec 3 cartes de contrôleur de vol, contrôleur 4-en-1 et émetteur vidéo au centre
● Châssis en fibre de carbone 3K ultra épais de 4mm composé de 4 bras indépendants, ce qui augmente la facilité d'entretien
● 4-en-1 BLHeli - S 30A ESC prend en charge Oneshot, Multishot, les derniers signaux numériques DShot ainsi que les mises à jour du firmware
● 5,8G 40CH FPV en temps réel, avec caméra CCD MICRON, plage de transmission d'image de 1km, réglage à distance de la fréquence / bande (prise en charge SBUS du récepteur requise)

Détails:
Empattement: 210mm
Poids: 267g
Taille: 178 x 178 x 38mm ( n'incluant pas les hélices )
Matériel de cadre: fibre de carbone 3K
Épaisseur inférieure de plat: 4mm
Épaisseur de plat supérieure: 1,5mm
Contrôleur de vol: OMNIBUS F3 Pro avec OSD
Moteur sans balais: F2205 2300KV
ESC sans balais: 4-en-1 BLHeli - S 30A
Hélice: Gemfan 5152 trois lames
Appareil photo: HS1177, 650TVL ( noir et blanc ), 600TVL ( couleur )
Capteur d'image: Super HAD II CCD 1/3 "
Émetteur vidéo: 5,8G 40CH 25mW / 200mW
Alimentation: 11,1 - 14,8 V ( 3 - 4S LiPo )

Contrôleur de Vol OMNIBUS F3 Pro
Processeur: STM32F303 MCU
IMU: MPU6000 SPI
Baromètre: BMP280
BEC intégré: oui
Carte micro SD supportée: jusqu'à 32 Go

BLHeli 4-en-1 - S 30A ESC
Processeur principal: EFM8BB2F16G
Pilote: FD6288 MOSFET
Évolutif: oui
Courant continu: 4 x 30A
Courant en rafale: 4 x 35A

Appareil Photo 960H
Capteur d'image: 1 / 2,7 pouces CCD
Résolution: D1, 960H
Objectif: 2,5mm
Système TV: PAL / NTSC ( réglable via OSD )
Min. illumination: 0,001 lux
Alimentation: 5 - 17V DC

Cliquez-ici pour en savoir plus sur la résolution.
Cliquez-ici pour télécharger le manuel d'utilisation de la caméra FPV.

Différentes Versions:
PNP: sans récepteur
BNF DSMX: inclut le récepteur DSMX Pro, compatible avec les protocoles DSM2 et DSMX. 500m recevoir distance
BNF FrSky: inclut le récepteur FrSky Pro 8 canaux, compatible avec le mode D8, supporte SBUS (par défaut) et PPM. 500m recevoir distance
BNF FLYSKY AFHDS: inclut le récepteur FLYSKY AFHDS PPM, compatible avec l'émetteur AFHDS. 500m recevoir distance
BNF FLYSKY AFHDS 2A: inclut le récepteur FLYSKY AFHDS 2A, compatible avec l'émetteur AFHDS 2A. 500m recevoir distance

Remarque:
Les couleurs ( noir, bleu, rouge, rose et transparent ) du jeu d'hélices seront expédiées au hasard.

Spécification

Spécification

Type: Lit de Cadre
Version: BNF

Moteur

Type: F2205
Type de Moteur: Moteur Sans Brosse
KV: 2300

Contrôleur de vol

Type de vol Contrôleur: F3

Spécification

Résolution Vidéo: D1, 960H
Capteur: CCD

Contrôleur de vitesse électronique

Matériel: BLHeli-S
Fonctions: DShot150,DShot300,DShot600,Multishot,Oneshot125,Oneshot42

Poids et Dimension

Poids du produit: 0,5200 kg
Taille de produit(L x W x H): 17,80 x 17,80 x 3,80 cm / 7,01 x 7,01 x 1,5 pouces
Taille d'emballage (L x W x H): 26,00 x 20,00 x 7,00 cm / 10,24 x 7,87 x 2,76 pouces

Liste d'emballage

Liste d'emballage: 1 x Drone, 4 x Hélice de Rechange, 1 x Sangle de Batterie

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

BFlight 210 210mm FPV Drone de Course sans Brosse- Noir et Bleu BNF FRSKY

Clause de non-responsabilité:
Nous n'acceptons pas aucune responsabilité ou obligation pour l’utilisation abusive de ce produit ou tous autres produits. Tous nos produits sont sévèrement testés pour conformer aux normes QC rigoureuses et strictes. Pour certains produits (par exemple les jouets, couteaux, etc.), nous recommandons une supervision appropriée comme nous ne pouvons pas être tenus responsables pour des abus ou des accidents.

Notes de Couleur et Style:
La couleur et le style (ou motif) de produit sont limités par des stocks disponibles, nous nous réservons le droit de substituer à une autre couleur.

PRODUITS RECOMMANDÉS

PRODUITS SPONSORISÉS

Bonus du Nouveau Membre: Coupon de $50
164.94€

BFlight 210 210mm FPV Drone de Course sans Brosse

Couleur

Taille

Quantité - +
Versements: choisir
loading...
loading...
Annuler
loading...
loading...
loading...

Avis

4.65 *****
  • 46
  • 22
  • 1
  • 0
  • 0
  • Tout ( 69 )
  • ( 39 )
  • ( 11 )
passerbyeus@yahoo.com
24/04/2018 01:52:48
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Suggestion:
Like to seen a micro cam on it but the stock cam will do great..
Bfight 210
15/02/2018 09:50:41
I am loving this drone !! it's great !! for the price I paid this drone is perfect for 210mm size, he is great for freestyle and HD filming with a small camera mounted on top of it, he has great punch, great precision and is really stable
Suggestion:
the camera could be better/lighter, and the receiver is not great, the antenna is really short and the range is not really good, needs an upgrade with a better one
Dacruze
13/01/2019 10:44:34
Not a bad drone. It’s a ready to fly purchase, for cheap. You get what you pay for. I’m sure I’ll figure that out myself as well. I received it within about 3 weeks. The packaging could have been a little better. Came in a generic cardboard box, no graphics, and foam holding the drone. It has instructions on various parts but not a parts list with specific part models in case of replacement. I bought the pnp no receiver option. It’s smaller than you think. Came with gemfan props, clear and black (mine did). Once I get it in the air, I’ll be able to see more about how well it flies. It’s just something to get me in the air for now.

Pro: price. Small. Looks well built and frame isn’t too heavy/clunky. Clean wire management. On screen display.

Con: it’s got a small bay for your stack. Which in turn makes the top and bottom plate also small. So you can either mount a battery on top. Or a go pro on top but battery on the bottom. No room to put both on top. Also battery straps included were super cheap, and small. But that is also because another con, they gave you practically no room to feed a strap through for the battery or an action camera. Also the fpv cam sticks out of the stack bay; so if you hit a pole or something that will get between the two front arms and get to the camera; it’ll most like break the camera or at least severely damage it. I would replace with a micro cam.

Would recommend for a friend for sure though.
Lee
16/07/2018 02:40:23
I was flying my quad in the park yesterday and sometimes I admit I fly in the streets in traffic. This is in a public park where tons of pedestrians walk interspersed with vehicle traffic and nobody seems to mind us playing with our toy drones in the park. Well, some ahole was driving and I pulled my quad in front of his truck preparing to get out of his was by pitching forward and throttling up to achieve maximum speed. This guy hit the gas and ran his bumber into my quad. This was a big Toyota Tacoma and I know that he saw it before hitting it therefore he did this on purpose because he's a jerk, because we had words after and he actually apologized for what he did. Since he did apologize, I just let him leave the park. My BFight survived the encounter intact so I'm not gonna hurt this prick. The quad flies smooth as hell and it's pretty fast too. I suppose the pickup truck hitting the damn thing (and it surviving without a scratch) speaks to durability as well. I can recommend this as a second quad for those who are already hooked. It is a step in the right direction for noobs advancing on to intermediate pilot status! Like me!!!
Suggestion:
It was hard to hit the bind button. I used a stick.
Stefan
16/01/2018 10:56:35
This is my 2nd racequad and I am absolutely impressed. Great quality, ligthweight build and good components. Only thing you have to change is the receiver when you fly with FrSky. The built in receiver ist just one for Tinys and has a maximum range of around 100m. Got a few failsaves on my maiden flight. Changed the receiver to a XM+ and now I have great range. Just fun to fly this one around. Unfortunately I broke my camera lens on one of the first crashes but that was no fault of the quad. Great quad for beginners of FPV flying as it is quite durable and very light.
Suggestion:
FrSky receiver is not suitable for a quad like this. With only 100m range you should change it.
David
24/06/2018 01:50:42
it's amazing for the price.. very stable in flight and enough power to do what you want it to do. loops rolls and flips very smooth with stock pids. comes with 2 pair of props.

for some reason I lost connection with the drone and it just kept going, and crashed somewhere.. I'm still looking for it.. should have changed it the Rx to xm+ or a r-xsr so I'm buying another one. but with a better Rx.

from now on I'm strapping a GPS tracker to every quad I Fly for now on..
Suggestion:
at about 100m my Rx fail-safed and it tumbled to the ground, must have hot just right the front two arms Broke off, after fixing those, it fail-safed again, and flew away.
BFIGHT 210 PNP
06/12/2017 14:55:38
a really great deal on a sweet 5 inch light weight quad. ive read so many reviews and watched so many videos that i had to try this out for myself..very impressed.

..great power..fun to fly..easy to work on..great props included..very easy to learn tuning and betaflght since it is hard to bring out any bad tendencies..
Suggestion:
the camera aspect ratio is bad for me..maybe because i am used to a different ratio

no frame or spare parts are available.

needs a better battery strap and some velcro on the bottom for safety
koki
23/02/2018 13:22:09
This is more than i expected, the frame is light but is very durable, the build quality is great, the soldering is done professionally, there is very little few things to tweak before flight and you have a perfect quad.
Suggestion:
Everything is super, no cons.
Phil
24/04/2018 02:14:41
It files great with so much power with 4s 1300mAh batteries. Very smooth in the air.

AFHDS 2A receiver it came with performed nicely with my FS-I6 radio. I haven't done the range test but 200m was not a problem.

Craft is considerably lightweight and I would recommend it to anyone starting FPV.
Suggestion:
Camera could be better. I had some trouble viewing the screen when I was facing towards the sun. Screen was kinda washed out when facing sun.
Vincent Fischer
19/09/2017 15:41:38
It's very light and silent. It runs very good with stock PIDs. Build quality is good (except the motor wires soldered to the 4in1 ESCs. they look like balls, made by someone with zero solder skills). I dislike some things on this model very much but still don't regret that I bought it. Overall experience is decent.
Suggestion:
I think this one is a bit over hyped. It's light but still pulls a bit too much current with the provided props. Also the micro DSMX receiver does not have diversity and the receiver antenna length is a bad joke. Without diversity and surrounded by carbon, prepare for some failsaves (you should be used to this if you use Spektrum :P). This kind of receivers is for micros and not for a full sized mini kwad imho. (Better buy the PNP and provide your own diversity RX with proper antennas)
The camera is some weird aspect ratio and looks very stretched on standard 4:3 goggles. Also you have to disassemble the frame to reach the OSD joystick.
The implementation of the VTX remote switching is just plain dangerous. It can happen that you change channel midflight. I would recommend to pull the S.Bus wire out of the connector that goes to your VTX.
Last but not least...what were they thinking when they chose these battery straps. They are just awful but there are no cutouts for better straps. You have to use these thin ones that are not even real velcro. They just don't work (atleast for me). I think i will dremel away some parts of the top plate to make bigger straps fit.
Don't let you discourage by the many negatives I wrote, I still like this model.
Voir Plus
Voir Plus
Voir Plus